 |
|
|
Our
Support
Representatives
are available
M-F 8am-6pm CST |
 |
 |
|  | 
| PHK05 RC5000 Wireless Receiver Transmitter Kit 
|  Wireless Remote Control System lets you control up to 8 X10 Modules from inside or outside your home. Can also dim and brighten lights connected to Lamp Modules and Wall Switch Modules. The Transceiver is an Appliance Module and sends X10 signals to up to 16 Unit codes on the same house code Giving your hand-held remote control of 16 lights and appliances. Note, you should only use one transceiver base per house code. If greater range is needed use a SR731 repeater. The RC5000 system includes the PHR03 Transmitter and PAT01 Transceiver.
Tech Notes: The appliance module in the transceiver may be controlled by both the RF remote and an X10 command on the powerline. The slide switch on the transceiver sets the built-in outlet to Unit 1 or Unit 9. Also note that the base supports the X10 status command available in high end controllers. The module will respond with status = on or status = off. Our tests show range will vary between 20 and 45 feet . Your actual range may vary depending upon the RF characteristics of your home.
 These prepackaged
RF remote and transceiver kits are the perfect solution to wireless control of
your X10 lighting and appliance control system.
X10 Format
- Quality Home Automation Product
RC6500 includes
the 2-channel RF Keychain Remote PHR04
and Base Transceiver PAT01.
RC5000 includes the 16-channel RF Handheld Remote PHR03
and a Base Transceiver PAT01.
Controls Lamp
Modules and Appliance Modules
from up to 100ft away, even through walls.
One Year Manufacturer
Warranty
Programming Instructions for RC5000: PAT01
& PHR03
|
|
|
