Plug-in receiver emits
a doorbell like chime when it receives the appropriate “ON” signal from X10 controller.
X10 Format - Quality
Home Automation Product
The Remote Chime is designed
to work with the X10 Pro Dual Floodlight Motion Detector (PHS01)
to provide a pleasant annunciator chime when someone approaches.
Can also be activated
using the X10 Pro Controller, such as the Power Flash Interface (PSC01),
or the Mini Controller (PHC01).
Attach
the X10Pro Wireless Door/Window Magnetic Contacts
PDS01 to your garage door in such a way so that the sensor and magnet
are together when the garage door is fully closed. Connect the Red and Black
wires from the contacts to a Powerflash Interface
and plug the Powerflash Interface into any convenient wall receptacle. Set
the Powerflash to Mode 3, Input B and then set the House and Unit Code to
the same code as the X10 Lamp Module, X10
switch or other X10 signaling device you want to use. When your garage
door opens, it will turn on your designated light and turn it off again
when it closes. Set the X10 Chime Module to the
same code and you will also hear a chime when the door opens.
Wireless Plug-in Remote
Chime