This item is no longer available. Use the PLM01.
 Stanley LightMaker
Lamp Module
Turns lamps on
and off from anywhere in the house using the
LightMaker Mobile Control and Base Unit and
LightMaker Garage Door Opener Transmitter (requires LightMaker Mobile Control
and Base Unit).
X10 Format - Quality Home Automation Product
Easy-of-use.
No wiring necessary.
Maximum wattage
is 300W. Plugs into 120VAC(60Hz) wall outlets.
For controlling
plug-in incandescent lamps, table lamps,floor lamps etc. Can be dimmed and brightened
from any LightMaker Control.
Rated for 300 watts incandescent only. Use the
Appliance Module for fluorescent lamps.
Selling at
$5.99 each, 6 for only $32.99, 12 for only $59.99
|
Know
When Your Garage Door Is Open!
|
 |
| Attach the X10Pro
Wireless Door/Window Magnetic Contacts PDS01 to your garage door in
such a way so that the sensor and magnet are together when the garage door
is fully closed. Connect the Red and Black wires from the contacts to a
Powerflash Interface and plug the Powerflash
Interface into any convenient wall receptacle. Set the Powerflash to Mode
3, Input B and then set the House and Unit Code to the same code as the
X10 Lamp Module, X10
switch or other X10 signaling device you want to use. When your garage
door opens, it will turn on your designated light and turn it off again
when it closes. Set the X10 Chime Module to the
same code and you will also hear a chime when the door opens. |
|
