This supervised sensor transmits wireless signals to the PRO2000 security console when a door or window is opened. Install up to 16 sensors. Mount at your door or window using the provided foam tape or screws. Up to four additional magnetic switches may be added to this transmitters (counts as one zone). Switch to settable for instant alarm mode or as a delayed sensor. Use with any sensor that either opens or closes a dry contact when triggered. Uses two AA batteries.
 X10-compatible Wireless
Door/Window Sensor
X10 Format - Security
& Automation for the Professional
Sends radio frequency
signal to X10 Security System
model PRO2000VP and PRO2000
Digital Console in response to a door or window separating from the included
magnetic switch (Sold Separately).
Perfect for any home!
Protects swinging doors,
sliding doors, windows, and other entrances.
Requires 2 AA batteries.
One Year Manufacturer
Warranty
|
Know
When Your Garage Door Is Open!
|
 |
| Attach
the X10Pro Wireless Door/Window Magnetic Contacts
PDS01 to your garage door in such a way so that the sensor and magnet
are together when the garage door is fully closed. Connect the Red and Black
wires from the contacts to a Powerflash Interface
and plug the Powerflash Interface into any convenient wall receptacle. Set
the Powerflash to Mode 3, Input B and then set the House and Unit Code to
the same code as the X10 Lamp Module, X10
switch or other X10 signaling device you want to use. When your garage
door opens, it will turn on your designated light and turn it off again
when it closes. Set the X10 Chime Module to the
same code and you will also hear a chime when the door opens. |
|
