- ON/OFF control of one number code plus intensity control
- Gang units together to create custom features
- Easy 2-wire install
- Color: Ivory
Can't find a wall-mounted switch that meets your exact needs? No problem! Simply create your own. It's easy with these customizable wall-mounted controllers. They work just like the tabletop X10 controllers but are permanently mounted in a standard wall switch box and fit standard DecoraŽ wall trim plates. This ivory Wall-Mounted Controller for One X10 Address features On/Off and Bright/Dim control.
Setup is a snap: simply connect two wires (Hot and Neutral) from inside the wall box to the two leads coming off the controller. To set the button address, just pop off the keypad, and set the house that the transmitter will controlling. You can even combine units in a multiple wall switchbox to build control panels with custom features.
Since these wall-mounted controllers are primarily transmitters of X10 signals, they do not have the ability to directly control a load. If you are replacing an existing switch (mechanical or X10) with a wall-mounted controller, you will need a X10 receiver to do the switching of the load formerly controlled by the switch. We suggest using Fixture Relay Modules or Plug-In Modules (for locations where the switch controlled an outlet).
Trim plates are not included.
| 
